Cygnus DIVE Underwater Ultrasonic Thickness Meter

Display 2.8” quarter VGA color LCD (320 x 240 pixels). Large clear thickness measurement (15 mm high numbers), viewable from all angles. A-scan display with automatic X axis. Battery level, signal strength, transducer type, velocity. Measurement mode and units indication.
Battery Single 3.6V Li-ion 8.2 W battery. 10 hours continuous measurement. Low battery warning ‘alert’ message.
Measuring Modes Multiple-Echo using 3 echoes to ignore coatings up to 0.8 inch (20 mm) thick
Echo-Echo using 2 echoes to ignore coatings up 0.04 inch (1 mm) thick
Single-Echo using 1 echo
Deep Coat In Multiple-Echo mode, allows measurement to be made through thicker coatings of suitable materials of up to 0.8 inch (20 mm) thick
Accuracy ±0.1 mm or 0.1% of thickness measurement, whichever is greatest, when calibrated in accordance with Cygnus Instruments calibration procedure
Transducer Options Single crystal transducers and Twin crystal transducers
Transducer Cables Double outer jacket in tough PU. Colored yellow for easy locations underwater. Coiled for ease of use. Fischer S105 series connectors.
Measurement Range in Steel 0.039 – 10 inch (1 – 250 mm) depending on selected transducer and configuration, material and temperature
Measurement Resolution Multiple-Echo with single crystal transducers – 0.1 or 0.05 mm
Single-Echo and Echo-Echo with twin crystal transducers – 0.1 or 0.01 mm
Measurement Units inches or mm
Transducer Zero Fully automatic probe zeroing for all transducer types
V-Path Correction Automatic V-Path correction for all twin crystal transducers
Velocity Range 2,000 to 9,000 m/s in 1 m/s steps
Pulser Twin channel 70 V spike pulser
Receiver / Amplifier
10 MHz bandwidth, 120 dB range, automatic TCG
60 MHz measurement time-base
Data Logging (Optional)
One-handed automatic logging of stable measurements. Capacity for up to 5,000 points including 640 point A-Scan data.
Data Output RS-485 single pair, half duplex for surface connection
Standards Designed for EN 15317
Compliance CE, UKCA, RoHS
Warranty 3 years on meter and 6 months on transducer

Instrument body with wrist strap
Ultrasonic transducer with coiled cable
2 rechargeable batteries
Membrane couplant
Battery charger with charger base
AC mains lead for battery charger
Ultrasonic couplant gel
Test block
Spare probe membranes
Membrane key
Silicone grease
USB flash drive with documentation
Calibration certificate
Operating manual.

Weight 5 kg
Kit
Cygnus DIVE Gauge Standard Kit with S2C 2.25MHz 13mm Standard Probe, Cygnus DIVE Gauge Standard Kit WITHOUT PROBE, Cygnus DIVE Data Logging Gauge Kit with S2C 2.25MHz 13mm Standard Probe, Cygnus DIVE Data Logging Gauge Kit WITHOUT PROBE

Topside Repeater (TSR) Remote Display Unit
The Cygnus Topside Repeater is a remote display unit connected to the DIVE meter with an umbilical cable. It displays the thickness measurements at the surface in real-time during the survey.

Topside Repeater with Video Overlay
The Topside Repeater can also overlay the real-time thickness measurements on to a composite video signal, displaying it on the survey monitor screen. It will also then be recorded (if there is a video of the survey), showing exact locations and the thickness measurement for future reference.

HelmetView™ Display
This is a remote display with a fixing bracket for Kirby Morgan® Helmets that have an accessory mounting point. This is depth rated to 984 ft, and designed for use in situations with extremely poor visibility and ease of viewing by the diver.